Is it time to replace your garage door? Whether your old door is damaged, dated or just doesn’t suit your style, a new garage door can be a great investment. It can boost your curb appeal and achieve great return for personal enjoyment or home resale value. To start the process of replacing your door, you must first know how to measure for the replacement. Before you call for garage door services in Rancho Cordova, CA, use the following process to get your measurements right:
- Gather your tools: To take measurements for your new doors, you will need a few simple tools. Gather a tape measure, a step ladder and a pen and paper (or other recording materials).
- Measure the width: To begin measuring, start with the width. It is essential to measure the door at its widest point, so you’ll want to measure in the middle (halfway up the door, around chest-height, depending on how tall you are). Measure from the left side directly across the opening to the right side. You may need a second pair of hands to help you hold the tape measure. A digital tape measure is another solution. Record the measurement in feet and inches.
- Measure the height: As with the width, you need to record the height at the highest possible point. Check the floor and opening to ensure they are level. Measure from the floor of the garage to the top of the garage door opening. Record this in feet and inches as well.
- Measure the space: For garage door operation, you need up to 3.75 inches on each side of the garage door opening. This is necessary to install vertical track for the door. Measure the width from the garage door opening to the side of the garage. Repeat for the other side. Record these measurements in feet and inches (although it’s often less than a foot). If you will be installing two single-car garage doors, the center post between the doors must be at least 10 inches wide.
- Measure the distance: Grab your stepladder for this one. This measurement is known as the headroom. Because your garage door will need space to roll up on its tracks, you must measure how much room there is above the opening. Measure the distance from the top of the opening to the ceiling. Record this in feet and inches.
- Measure the length: The last measurement you need is the distance from the opening to the back of the garage. Also known as the backroom, this space must be ample for your garage door to retract into the garage. Record this in feet and inches.
Ready to Order?
Once you’ve taken the proper measurements, you are ready to consider your new garage door options. Contact your local expert provider of garage door services in Rancho Cordova, CA to make your selection. The experienced staff at Action Door Service is available to help you choose the best option for your property and budget.